Skip to content

KONE · Platform

KONE KSS signalling — buttons, flanges and parts

KSS is the KONE signalling range: the parts the user sees and handles. It covers the control panel in the car, called COP in the manufacturer documentation, and the call stations at the landing, called LCS.

The signalling components are driven by the unit’s control and electrification electronics, called LCE. Buttons and indicators are therefore not simple contacts: replacing them requires respecting the original type of link and marking.

Almost all the KSS references offered by KMY fall into two families: the buttons themselves and the flanges around them. These are the parts most exposed to wear and vandalism.

Technical sheet

Technical specifications

Manufacturer designation
KSS 280 Series Signalization
Covered locations
COP — car control panel · LCS — landing call station
Control
LCE — KONE control and electrification electronics
Common components
Call and control button · Door open button (DOB) · Flange and cabochon · Button indicator and lighting · Call acknowledgement buzzer
Marking
Each button carries its own manufacturer marking (for example 772823H05) that identifies its version
Type of supply
Genuine or compatible parts depending on the reference — the information appears on each sheet

Installation architecture

Parts are divided into four zones. Identifying the zone concerned is the first diagnostic reflex: it immediately narrows down the possible references.

Car control panel (COP)

It groups the floor buttons, the door open button, the alarm and the display. It is the most heavily used element of the installation.

Related parts: KSS button · flange · faceplate

Landing call station (LCS)

Call button, registration indicator and, depending on the configuration, acknowledgement buzzer and position display.

Related parts: landing button · indicator · display

Link with the controller

The signalling communicates with the LCE electronics. The type of link and the lighting voltage must be respected on replacement.

Related parts: KONE board · wiring

Control lighting

The button’s light feedback is part of the function: a button that is mechanically compatible but has the wrong lighting is not equivalent.

Related parts: lighting · LED

Points of attention

  • Note the marking carried on the original button: it, and not appearance alone, identifies the exact version.
  • Tell the car button from the landing button: they look alike but their functions and connections differ.
  • The flange and the button are often replaced separately; check what the ordered reference includes.
  • The colour and type of lighting must be matched across the whole bank of buttons, otherwise the result looks visually inconsistent.
  • Controls accessible to users must keep their raised and braille marking, in accordance with accessibility rules.

Get a quote

State the part reference if you know it, the number of levels and accesses of the unit, the type of wiring and your wilaya. A photo of the part in place and its markings confirms the match. KMY confirms the final price, availability and delivery time in Algeria.

Search all KONE KSS parts in the catalogue ↗

Source of the specifications: KONE KSS 280 Series Signalization — Maintenance instruction, ref. AS-12.20.027 (2013). Manufacturer terminology quoted for identification purposes. Data reproduced for information only; only the manufacturer’s documentation is authoritative. Specifications may change between versions.

FAQ

Frequently asked questions about KONE KSS

What does KSS mean at KONE?

KSS is the KONE signalling range: call and control buttons, flanges, indicators and faceplates, in the car and at the landing. The manufacturer documentation calls it KSS 280 Series Signalization.

What do COP and LCS mean?

COP stands for the control panel located in the car (Car Operating Panel). LCS stands for the call station located at the landing (Landing Call Station). Both belong to the signalling range, but their components are not interchangeable.

How do I identify a KSS button to replace?

Each button carries a manufacturer marking that identifies its version, for example 772823H05. Note this marking, the location — car or landing —, the colour and the engraved symbol. A clear photo of the button and its back confirms the match.

Are the KSS parts offered genuine?

Depending on the reference, KMY supplies genuine parts or compatible parts intended to replace them. The information appears explicitly on each product sheet, in the “Type of supply” line.

Can only the flange be replaced?

Yes in most cases: the flange and button mechanism are separate parts. The flange, more exposed to wear and vandalism, is often replaced on its own. Check compatibility with the type of button in place.

A reference to find? Send us the marking on your part.

Let’s talk. Our teams reply within 48 hours with a first estimate.

Request a quote